Irrigation Tube Extruder
Flat Drip Tape Line
Round Drip Pipe Line
Rain Hose Extrusion Line
Strip-embedded Drip Tape Line
PE Layflat Hose Line
PE Irrigation Pipe Line
Labyrinth Drip Tape Line
Flat Drip Tape Line
Flat Dripper Tape
The author: The release date:2013-06-08 16:57:27 reading:times



1. Diameter for Drip Tape: 16mm
2. Wall Thickness for Drip Tape: 0.2mm, 0.3mm, 0.4mm
,0.5mm, 0.6mm
3. Nominal Working Pressure: 0.8bar to 2.2 bar
4. Dripper Spacing: 10cm, 15cm, 20cm, 25cm, 30cm, 40cm, 50cm, 60cm
5. Roll Length: 500m, 1000m, 1200m, 2000m
1. Each dripper has its independent filter to prevent particulate matter from entering.
2. It is groove designed, with long flow tunnel, good turbulent flow, and even water dripping.
3. Designed with wide flow tunnel. Drippers are not easy to be blocked.
4. Made with 100% virginal material, with functions of anti-corrosion, anti-blocking and ageing resistance and long service life.  
5. Dripper spacing and flow rate are accurate, with labyrinth design. The coefficient difference is less than 2.0%.
6. Dripper flow rate, spacing and roll length can all be adjusted according to request from customers.
7. The economic spray length is 80 to 120 meters.

<< In the previous:没有了! The next article >>:没有了!  

Print this page || Close the window

 All rights reserved: Laiwu Winwing Plastics CO.,LTD   Contact:Brady Xuan
 Address:West End of Luzhong Avenue, Laiwu District, Jinan City, Shandong Province, China